Tuesday, October 20, 2026
MiningNewsTerminal
Tuesday, October 20, 2026 Admin

PONY.CN ·

Models Large Geophysical Anomalies and Increases Land Position

Property Options & Staking Exploration Programs Sampling & Geoscience Results

3707‐1111 Alberni Street, Vancouver, British Columbia V6E 0A8

News Release 

DELREY MODELS LARGE GEOPYHSICAL ANOMALIES ON ITS BLACKIE,  PORCHER, AND STAR PROPERTIES 

INCREASES LAND POSITION DUE TO POSTIVE RESULTS 

April 15, 2019                   CSE:DLRY | FSE:1OZ | US:DLRYF

DELREY  METALS  CORP.  (CSE:DLRY,  FSE:1OZ,  US:DLRYF)  (“Delrey”  or  the  “Company”)  is  pleased  to announce  that  it  has  completed  airborne  geophysics  across  its  Porcher,  Blackie  and  Star  properties located  near  Prince  Rupert,  British  Columbia.  The  results  are  very  encouraging  and  outline  sizeable magnetic anomalies on all three properties. This is highlighted by two, 3km x 2km & 2.7km x 1.8km, magnetic highs located on its wholly‐owned Porcher property (Fig. 1), a 11km long northwest‐southeast trending magnetic high located on its wholly‐owed Star property (Fig. 2), and a 1.5km x 800m magnetic high (up to 68,000nT raw) located on its wholly‐owned Blackie property (Fig. 3). A historic 2.14% V205 bedrock  sample  from  the  Blackie  is  believed  to  be  coincident  with  the  newly  mapped  geophysical anomaly (McDougall, 1984).1

The three surveys were completed by Ridgeline Exploration Services Inc. out of Kelowna, B.C., and were flown in a systematic low‐level grid pattern at 150‐m line spacing. The average terrain clearance was 75m across all surveys and a total of 1,105.55 line‐km (Porcher: 472.48 line‐km; Star: 457.48 line‐km; Blackie: 175.59 line‐km) were flown.

Based on results from the surveys the Company is pleased to announce that it has increased to size of the Porcher property from 3,122.16 to 3,525.46‐hectares, and the Star property from 3,646.8 to 4,618.3‐ hectares to fully encompass the newly discovered magnetic anomalies. The results from the surveys will be used in helping Delrey’s technical team plan a Phase II work program which will include prospecting, mapping and rock sampling over the geophysical anomalies.

The crews are currently mobilizing to the Peneece property and it is estimated that the survey will be completed within the week with results released shortly thereafter.

“The Delrey team is quite excited by the results of the Phase I work program on the Blackie, Porcher and  Star  properties.  High‐resolution  magnetics  are  an  effective  tool  used  for  vectoring  towards  Fe‐Ti‐V  bearing magnetite deposits. The large anomalies identified by the 2019 surveys combined with historic  surface sampling confirming vanadium and titanium mineralization gives us confidence in the potential  of these three properties. We are looking forward to returning to the properties in the coming weeks to  follow up with a Phase II work program over the magnetic anomalies. This timeline will allow Delrey to  conduct  a  Phase  III  work  program  on  the  properties  during  the  summer  months  which  may  include  diamond  drilling  over  the  highest  priority  targets  developed  from  the  Phase  I  and  II  field  programs”, commented Morgan Good, Delrey’s President and Chief Executive Officer.

FIG. 1 

FIG. 2 

FIG. 3 

About Delrey 

Delrey is a mineral exploration company focused on the acquisition, exploration and development of mineral  resource  properties,  specifically  in  the  strategic  energy  metals  space.  The  Company  has  an option to earn a 100% interest in the Sunset property located in the Vancouver Mining Division near Pemberton, British Columbia. The Company also owns 100% of the Star, Porcher, Peneece and Blackie Fe‐Ti‐V properties located along tide‐water in western British Columbia. Delrey will continue to review and  acquire  projects  showing  potential  for  materials  used  in  the  energy  storage  and  electric  vehicle markets.  The  Company  is  based  in  Vancouver,  British  Columbia,  and  is  listed  on  the  CSE  under  the symbol “DLRY”.

Qualified person 

Scott Dorion,, P.Geo., is the designated Qualified Person of the Company as defined by NI 43‐101 and has reviewed and approved the technical information contained in this release.

ON BEHALF OF THE BOARD OF DIRECTORS OF  DELREY METALS CORP. 

“Morgan Good” 

Morgan Good President and Chief Executive Officer

For more information regarding this news release, please contact: 

Morgan Good, CEO and Director T: 604‐620‐8904 E: [email protected] W: www.delreymetals.com

1This historical results are believed to be based on reasonable assumptions, and neither the company
nor its qualified person has any reason to contest the relevance and reliability of the historical samples.
However, a qualified person has not done sufficient work to replicate historic rock grab samples using
current lab methods. Although the historical rock grab samples are believed to be based on reasonable
sampling and assay methodologies, they were calculated prior to the implementation of National
Instrument 43‐101. The historical results have not been verified.

Cautionary Note Regarding Forward‐Looking Statements 

Certain statements contained in this news release, constitute “forward‐looking information” as such term is used in applicable  Canadian securities laws. Forward‐looking information is based on plans, expectations and estimates of management at the  date the information is provided and is subject to certain factors and assumptions, including, but are not limited to, general  business and economic uncertainties. Forward‐looking information is subject to a variety of risks and uncertainties and other  factors that could cause plans, estimates and actual results to vary materially from those projected in such forward‐looking  information.  Factors  that  could  cause  the  forward‐looking  information  in  this  news  release  to  change  or  to  be  inaccurate  include, but are not limited to, the risk that any of the assumptions referred to prove not to be valid or reliable, which could  result in delays, or cessation in planned work, that the Company’s financial condition and development plans change, delays in  regulatory approval, risks associated with the interpretation of data, the geology, grade and continuity of mineral deposits, the  possibility  that  results  will  not  be  consistent  with  the  Company’s  expectations,  as  well  as  the  other  risks  and  uncertainties  applicable to mineral exploration and development activities and to the Company as set forth in the Company’s Management’s  Discussion  and  Analysis  reports  filed  under  the  Company’s  profile  at  www.sedar.com.  There  can  be  no  assurance  that  any  forward‐looking information will prove to be accurate, as actual results and future events could differ materially from those  anticipated in such statements. Accordingly, the reader should not place any undue reliance on forward‐looking information or  statements.  The  Company  undertakes  no  obligation  to  update  forward‐looking  information  or  statements,  other  than  as  required by applicable law. 

Neither the CSE nor its Regulation Services Provider (as that term is defined in the policies of the CSE)  accepts responsibility for the adequacy or accuracy of this release.